A New State Of Art Concept Loading Metering Skids

Introduces a Loading Metering Skid (LMS), a certified solution for CUSTODY TRANSFER of light hydrocarbons including gasoline, diesel, jet fuel and marine gas to and from tanker trucks, railcars and ships.

The skid includes a Coriolis flow meter, batch controller, grounding system, temperature sensor, digital start-stop valve, Y-strainer, isolation valves, frame, piping, an Exd junction box, and other associated components. The skid is certified for custody transfer per MID Directive 2004/22/EC, Class 0.5.

A Demo Skid can be seen at our Head office
A Demo Skid can be seen at our Head office.

The LMS skids are completely assembled and certified for easy installation and commissioning at a loading or unloading depot. Skids are available for horizontal or vertical installation, including a loading arm. Options include an air eliminator, prover connections, pressure sensor, grounding system and a 2-inch blending line. The blending line can be connected to the metering skid and controlled by the batch controller via three different recipes.

The Promass Coriolis meter provides outputs for Mass flow, Density and Volume. This is especially important for the future as trends indicate light hydrocarbons will go from volume to mass billing, as is already in place for LPG custody transfer.

Due to the lower pressure loss of the Promass Coriolis mass flow meter as compared to other types of flow meters, the loading/unloading station can operate at higher flow rates. This results in faster loading times, or lower pump energy consumption at the same flow rate.

Three versions of the skid are available: Model LMS080 for truck loading has a 3-inch line and a maximum loading rate of 3,300 lb/min (1,500 kg/min); Model LMS100 for railcar loading has a 4-inch line for a maximum loading rate of 5,500 lb/min (2,500 kg/min); and the LMS150 for ships has a 6-inch line for a maximum loading rate of 13,670 lb/min (6,200kg/min).


Open and standardized digital communication interfaces allow smooth integration to the Endress+Hauser Terminal Management System, Tank Vision Gauging system, or similar inventory management systems from third party suppliers.

The skid also connects to Endress+Hauser Terminalvision software for handling of requirements for road, rail and barge loading depots and terminals. The skid’s open control and monitoring system is designed to interface to most supplier systems used for access control, loading and weighbridges.

For more detailed technical information on the LMS Loading Skid, please go to the product page www.us.endress.com/custody-metering

About Endress+Hauser

Endress+Hauser is a Switzerland based company, one of the largest instrumentation manufacturers & solutions provider for the industrial automation industry – specializing in automation solutions for the Chemical, Food & Beverage, Oil & Gas, Water and Wastewater, Life Sciences, Power and Energy, Primaries, and Pulp and Paper Industries.

About Speedy Automation

Speedy Automation, exclusive partner of Endress+Hauser in Pakistan for the complete range of products and solutions for the Oil & Gas, Chemical & Petrochemicals Industries such as:

Custody Transfer Flow Metering System
Custody Transfer Tank Gauging System
Custody Transfer Ship Loading & Unloading System
Energy Monitoring & Plant Optimization System
Supervisory Control and Data Acquisition System
Custody Transfer Truck/Rail car Loading Unloading System
Tanks Overfill Prevention & Emergency Shut-Down System
Terminal Management System for Tank Farm & Terminals

For further information, presentation and live demo, please contact.

Speedy Automation
166-A Ghulam Ali Memon Road | Sindhi Muslim Cooperative Housing Society | Karachi | Pakistan
Mobile: +92 300 2146321 | Phone: +92 21 34328859 | +92 21 34328860 | +92 21 34328872 | +92
21 34328873 | Fax: +92 21 34328874
speedy@cyber.net.pk | www.speedy.com.pk

Oil & Gas Consultant Visited Speedy Automation

Petroleum Refinery Engineers Visited Speedy Automation